sevenfiftynine
In development
Printed in one piece. Shaped by the loads it carries.
01 · Exploded view
Eleven parts. That is it.
- 1 topology optimised body
- 4 titanium pistons
- 4 seals
- 2 anodised bore plugs
Designed with maintainability in mind. Unscrew the machined piston plugs to disassemble the caliper.
02 · The body
Maximising stiffness
The body is printed as a single part. With no joint across the disc, the bridge that carries the clamping force is one continuous piece of metal.
- Monobloc bridge Stiffest possible way to connect both halves.
- Open pad windows Swap pads from the top, with your caliper still on the bike.
- Efficient use of material The passage that carries fluid from one half to the other also keeps the body stiff.
1
2
3
03 · Up close
Raw, blasted, honest.




04 · AlZrFe
Formula 1 Alloy
Aheadd CP1, an aluminium-iron-zirconium alloy approved for 3D-printed parts in Formula 1. It moves heat fast and stays stable up to 300 °C.
Made for this
Send it.
Then stop it.
Steep, fast, and long. A downhill brake gets no rest, so this one was designed around the worst run of the day.
Photo: Komorebi Photo / Unsplash
05 · Heat
A long descent starts cold.
Brake fade starts when heat travels from the pads through the pistons into the fluid. So the pistons are the place to stop it.

06 · Pistons
Less Heat. More control.
Grade 5 titanium transfers far less heat from the pads to the brake fluid. Its thermal conductivity is around 27 times lower than the caliper body alloy.
Strong and lightweight, it allows thin-walled pistons without compromising performance.
The cutaway below reveals the four pistons and their retraction seals.
Thermal conductivity · W/(m·K)
The body radiates heat away. The pistons hold it back.
Typical room-temperature values from published data. They vary with heat treatment and print settings.
07 · Tech specs
The numbers.
- <150 gcomplete caliper
- 4 × 17 mmtitanium pistons
- 180–220 mmdisc sizes
- Type 8Magura MT5/MT7 pads
Show full specsShow less specs
| Body | |
|---|---|
| Construction | Monobloc, metal 3D printed (laser powder bed fusion) |
| Alloy | Aheadd CP1 (AlZrFe). Approved by the FIA for use in Formula 1. |
| Finish | Raw, sandblasted. Plugs anodised. |
| Weight | |
| Body | 70 g |
| Complete | <150 g |
| Hydraulics | |
| Pistons | 4 × 17 mm, titanium |
| Fluid | Mineral oil |
| Lever | OEM, exact models TBC |
| Disc & pads | |
| Disc diameter | 180–220 mm |
| Disc thickness | 1.8–2.3 mm |
| Pads | Magura Type 8 (MT5/MT7), four single pads |
| Mount | Post mount, standard spacers |
Specifications may still change before the final production version.
08 · The name
Why sevenfiftynine?
My full-time job starts at 8:00. So this caliper gets the mornings before that, every day until 7:59.
I'm Philip, a mechanical engineer in Zurich and a rider every weekend I can get. sevenfiftynine is my side project, and I'm building it in the open.
09 · Timeline
Proven first. Then for sale.
A brake is the part you trust most on your bike. So I don't want anybody to buy this caliper before it has been tested to industry standards.
- December 2026
Structural design finalised
- January 2027
Prototype batch manufactured in Switzerland
- February 2027
Tested to industry standards
- Once testing is complete
First reservations
Only if the design shows no flaws and performs as intended, the list gets the chance to reserve a caliper.
- With enough interest
First small batch
If enough calipers are reserved to meet the minimum order quantity, a first small batch will be manufactured.
10 · Follow the build
Ride it
first.
Follow the build and get the first chance to reserve one.
Want to pick your plug colour first?
Only big milestones by email. The nerdy details go on Instagram.
By signing up you agree to get emails about sevenfiftynine. Your address is processed by Brevo. Unsubscribe anytime.